Phone:0086-371-55629010
Phone:0086-371-55629010
In 1957, just a little more than 50 years ago, the first heat recovery steam generator (HRSG) was connected to a gas turbine and the combined cycle power plant was born.
Learn More
Heat recovery boiler/steam turbine systems operate thermodynamically as a Rankine Cycle, as shown in Figure 2. In the steam Rankine cycle, the working fluid wateris first pumped to elevated pressure before entering a heat recovery boiler. The pressurized water is vaporized by the hot exhaust and then expanded to
Learn More
Powerful heat recovery. The Alfa Laval Aalborg AV-6N is a robust and highly efficient water tube boiler with extended heating surface. Special design features like online cleaning, fast operation and vibration resistance make it ideal for maximum heat recovery in modern engine-based combined cycle power plants.
Learn More
The basic components of a combined cycle power plant and how they work together to produce energy; The basics of fuel combustion and how fuels are prepared and combusted in a combustion turbine; The basic components of a heat recovery steam generator and how they work together to produce steam energy
Learn More
Our Shell & Tube Rotor Air Cooler Kettle Boiler Heat Exchangers are used to cool gas turbine rotor cooling air in a Combined Cycle Power Plants. The rotor air heat is tranferred to the water on the shell side, which is converted to steam and piped into the HRSG. The recovery of waste heat produces a netr increase of the CCPP efficiency.
Learn More
AC Boilers, Italy's largest boiler manufacturer, ordered a supply of Thor ® 115 steel pipes for construction of the heat recovery steam generator installed inside the Edison Thermoelectric Power Plant at Marghera Levante.. The Edison combined cycle plant is billed to be the most efficient in Europe and will contribute to Italy's energy transition, thanks to a lower CO2-intensity system.
Learn More
Influence of pinch and approach point on construction of a HRSG in a combined cycle 77 Bg - flow rate of combusted fuel burned into the combustion chamber of the gas turbine cycle, m3/s; Q2 - heat flux lost in the condenser with cooling water, kW; Qcs - thermal heat flow of the secondary circuit, kW; Qd - thermal heat flow available, recoverable, of the flue gas evacuated from the
Learn More
With a wide range of filter membranes, reverse osmosis, cartridge filtration and polishing systems, we bring the complete water management solution to combined cycle plants. The result is a cleaner combustion, better operation of Nox control systems, protection of the boiler against corrosion and reduced water usage overall.
Learn More
Flow-accelerated corrosion can occur in combined-cycle heat recovery steam generator (HRSG) applications, as well as in nuclear steam generation systems, paper mill recovery boiler systems and in fossil-fired utility systems.
Learn More
The ability to capture and use this waste heat is known as heat recovery, since the waste heat is recovered and used for other purposes, including heating hot water. Although this process is not new, the benefits of heat recovery are even greater today. The use of heat recovery to generate hot water can reduce the total
Learn More
Within waste heat recovery technology, the terms bottoming cycle, topping cycle, and combined cycle are used. A bottoming cycle is a thermodynamic cycle which generates electricity from waste heat, as opposed to a topping cycle, in which waste heat from electricity generation is rejected to the environment (cooling wa-
Learn More
Heat Recovery Steam Generators are used to recover waste heat from the exhaust of gas turbines, boosting efficiency from a range of 35% to 40% in a simple cycle (also known as open cycle) mode to a range of 55% to 60% in a combined cycle mode.
Learn More
The Combined Cycle Users Group (CCUG) was launched in fall 2011, at its first meeting in San Antonio, as an independent, user-directed group to serve owner/operators of combined-cycle, combined heat and power (CHP), and cogeneration plants. The CCUG is distinguished by the logo shown here and not affiliated with any other group of the same or
Learn More
Combined Cycle Utility HRSG. The Victory Energy combined cycle HRSG is designed for operation with gas turbines in a multitude of applications. Gas or oil-fired, our HRSG Horizon® Series can be configured to provide saturated or superheated steam from 5,000 PPH up to 300,000 PPH in a single packaged system.
Learn More
Cogeneration | Combined Heat and Power. March 4, 2020 February 24, Combined-cycle topping CHP plant-In this type of plant the fuel is firstly burnt in a steam boiler. The exhaust gas is sent to a heat recovery boiler where it is used to convert water into steam, or to make usable heat for heating purposes.
Learn More